Moto Guzzi Breva 1100 Exhaust Mod
I put the MG race exhaust on my 1200 sport so I had the 1200 Sport full exhaust lying in the garage so I decided to experiment.
I removed the Breva's complete exhaust and installed the Stock exhaust from the 1200 sport. First of all the bike sounds very good and due to the larger headers, tubular crossover, (compared to the large box crossover of the breva) and free'er flowing exhaust It should add a little HP and will still be 100% EPA & sound complient because of it being an OEM system.
I don't know if it was in my head or not but the bike
seemed to have a little more pep & with the addition of a K&N filter should
be a good mod if you can source the parts used.
If you wanted to go a step up
you could use the breva 1200 sport ECU as well.
Just the 1200 sport
rear can will not work you will need the complete system.
A complete norge
system would work but you get a better look and sound with the 1200 sport rear
can.
These parts are quite expensive new but used ones will work just fine
Parts Needed For The Mod
| PART DESCRIPTION | PART NUMBER | RETAIL PRICE |
| Right Header | 977662 | $251.41 |
| Left Header | 977663 | $251.41 |
| Cross Over | 977664 | $185.62 |
| 1200 Sport Rear Can | 883004 | $621.80 |
| Norge Rear Can | 9776651 | $889.81 |
| 1200 Sport ECU | 977923 | $830.71 |
With
STOCK EXHAUST
With
1200 SPORT EXHAUST
1200
SPORT - - - - - - - - - - - - - - - - - - - - - - - -
BREVA 1100
last page update 2/27/12